In-Depth Introduction to the HTE2512M3W0R030F: A High-Performance 1225 0.03Ω (30m Ohm) 3W 1% Power Resistor
In the demanding world of modern electronics, where efficiency, precision, and reliability are non-negotiable, the choice of passive components can make or break a design. Among these, power resistors play a critical role in current sensing, voltage division, and pulse absorption applications. The HTE2512M3W0R030F stands out as a premier solution in this category, specifically engineered to meet the rigorous requirements of advanced power management and control systems. This article provides a comprehensive overview of this exceptional component, a 1225 0.03Ω (30m Ohm) 3W 1% precision resistor.
Technical Specifications
| Parameter |
Specification |
| Part Number |
HTE2512M3W0R030F |
| Resistance Value |
0.03Ω (30mΩ) |
| Tolerance |
±1% |
| Power Rating |
3W |
| Package Size |
1225 (6.4mm × 3.2mm) |
| Temperature Coefficient (TCR) |
±50 ppm/°C |
| Resistance Material |
Manganese Copper (MnCu) alloy |
| Operating Temperature |
-55°C to +155°C |
Product Overview and Core Specifications
The HTE2512M3W0R030F is a surface-mount device (SMD) power resistor that belongs to the 2512 package size (6.4mm x 3.2mm). Its most defining electrical characteristic is its ultra-low resistance value of 0.03Ω, which is equivalently expressed as 30 milli-Ohms (30mΩ). This exceptionally low value is crucial for applications involving precise current measurement without introducing significant voltage drops or power losses. Complementing this low resistance is a robust power rating of 3W at 70°C, allowing it to dissipate substantial heat generated by high currents. Furthermore, it boasts a tight tolerance of 1%, ensuring high precision and consistency from one unit to the next, which is vital for accurate circuit performance in mass production.
The combination of these three key specs – the 1225 0.03Ω (30m Ohm) 3W 1% – makes this resistor an ideal candidate for high-current pathways. The "1225" designation in the industry often refers to the metric code for the 2512 package, reinforcing its physical size. This specific set of parameters is carefully balanced to provide optimal performance where it matters most.
Unpacking the Technological Advantages
The performance of the HTE2512M3W0R030F is not accidental; it is the result of sophisticated material science and manufacturing processes.
High Power & MnCu Alloy Material: The core of this resistor's performance lies in its use of a Manganese-Copper (MnCu) alloy. This material is chosen for its excellent electrical properties, notably its very low temperature coefficient of resistance (TCR). The "Low TCR" or "low-temperature drift" characteristic means that the resistance value of 0.03Ω remains stable over a wide operating temperature range. This stability is paramount for accurate current sensing, as resistance fluctuations with temperature would lead to measurement errors. The robust construction allows it to reliably handle its full 3W rating.
High Precision of 1%: The 1% tolerance is a mark of high manufacturing precision. In current sensing applications, especially in motor drives, power supplies, and battery management systems (BMS), even a small deviation in the sense resistor can lead to significant inaccuracies in system monitoring and protection. The guaranteed 1% accuracy of the HTE2512M3W0R030F provides designers with the confidence that their systems will perform as intended, cycle after cycle.
Low Inductance Design: In high-frequency switching environments, such as those found in DC-DC converters and motor control circuits, traditional resistors can exhibit parasitic inductance that distorts signal integrity and causes voltage spikes. The HTE2512M3W0R030F is specifically designed with a low-inductance structure. This minimizes reactive impedance, ensuring clean and accurate current measurement even under fast-switching conditions, which is critical for maintaining system stability and efficiency.
Typical Applications
The unique blend of a 1225 0.03Ω (30m Ohm) 3W 1% specification, low inductance, and high stability makes this resistor suitable for a wide array of advanced electronic systems:
Precision Current Sensing: In server power supplies, industrial motor drives, and automotive control modules.
Battery Management Systems (BMS): For monitoring charge and discharge currents in electric vehicles, energy storage systems, and portable electronics, where accuracy is critical for safety and battery life.
Overcurrent Protection Circuits: Acting as a shunt resistor to trigger protection mechanisms when current exceeds a predefined threshold.
Power Supplies and DC-DC Converters: Providing feedback for current-mode control loops, ensuring stable and efficient power conversion.
Audio Amplifiers: Used in output stages for current sensing and protection.
Commitment to Quality and Environmental Compliance
The HTE2512M3W0R030F is manufactured in full compliance with global environmental regulations. It is certified to be RoHS (Restriction of Hazardous Substances) and REACH compliant, and it adheres to lead-free (Pb-free) soldering processes. This ensures that the product is safe for the environment and can be used in products destined for any market worldwide without regulatory hurdles.
Conclusion
In summary, the HTE2512M3W0R030F is far more than just a simple component. It is a high-performance engineering solution that addresses the critical needs of modern power electronics. Its core identity as a 1225 0.03Ω (30m Ohm) 3W 1% resistor, combined with its low-TCR MnCu construction, high power-handling capability, and inherently low inductance, positions it as a superior choice for designers who cannot compromise on accuracy, reliability, or efficiency. When your circuit demands precise current control and robust performance, this resistor is engineered to deliver.
Product Tags:
|
|
30m Ohm Power SMD Resistor High Precision 3 Watt Resistor For Current Sensing And Power Supply Images
|
